|
Break in time: |
40 - 50 hours |
|
Placement from rear wall: |
6"- 3' / 152 - 914 mm |
|
Placement distance apart: |
2' - 8' / 610 - 2,438 mm |
|
Frequency Response: |
57 Hz - 25 kHz ± 3 dB (in room) |
|
Impedance: |
4 ohms |
|
Sensitivity: |
87.5 dB/W/m. Maximum SPL 101 dB before dynamic compression |
|
Recommended Power: |
20 - 80 W |
|
Crossover frequency: |
2.5 kHz, 1st order compensated |
|
Speaker Terminals: |
4-way bi-wireable |
|
Woofer: |
4" / 102 mm; special long throw. |
|
Tweeter: |
1" / 25 mm titanium dome. |
|
Max Spl's: |
In average room (12' x 20' / |
|
Dimensions (w x h x d): |
5.1 x h 11.3 x 7.1" / |
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
